Microsoft 70-445 Exam - Certifysky.com
1. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package.
The package has the following features:
Two Data Flow tasks and two Control Flow tasks
A success constraint between each Data Flow task and the subsequent Control Flow task
The package uses one transaction for all the tasks.
You need to configure the package so that the two Data Flow tasks use their own transactions. You also need to ensure that each Control Flow task is enlisted in the same transaction as its preceding Data Flow task.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. Change the TransactionOption property to Supported for the package. B. Change the TransactionOption property to Required for the package.
C. Change the TransactionOption property to Supported for each Data Flow task.
D. Change the TransactionOption property to Required for each Data Flow task.
E. Change the TransactionOption property to Supported for each Control Flow task.
F. Change the TransactionOption property to Required for each Control Flow task.
Answer: A,D,E
2. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package. The package contains 30 Data Flow tasks and 30 Control Flow tasks. The package runs slower than expected. You need to capture the start time, the finish time, and the elapsed time for the validation and execution of the package. What should you do?
A. Enable the OnProgress event handler and use the Control Flow tasks to write the information to a log.
B. Monitor the Progress tab during the execution of the package, and then monitor the Execution Results tab.
C. Use the Performance Monitor tool to capture the counters from the SQL Server: SSIS Service object. Analyze the output for the required information.
D. Use the Performance Monitor tool to capture the counters from the SQL Server: SSIS Pipeline object. Analyze the output for the required information.
Answer: B
3. Microsoft SQL Server Management Studio (SSMS) is installed on your workstation. Microsoft Business Intelligence Development Studio (BIDS) is not installed on your workstation. You need to create a package that must meet the following requirements:
It must be transactional.
It must be optimized for 20 tables.
It must be stored securely in the msdb database of a remote server. What should you do?
A. Create the package by using DTS Designer.
B. Create the package by using the Package Migration Wizard.
C. Create the package by using the Microsoft SQL Server Import and Export Wizard.
D. On the Microsoft SQL Server 2005 Integration Services (SSIS) menu, click the Create Package submenu.
Answer: C
4. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package.
While testing, a Transact-SQL user-defined function causes duplicate key values that stop the transformation.
To permit the transformation to continue, the package must perform the following tasks:
1. Ascertain which rows are affected.
2. Insert the rows that fail into a table.
3. Continue with the process.
You need to change certain properties in the package to meet the requirements.
Which three tasks should you perform? (Each correct answer presents part of the solution. Choose three.)
A. Choose the Redirect Row option for the Error property on the key column.
B. Choose the Ignore Failure option for the Error property on the key column.
C. Choose the Fail Component option for the Error property on the key column.
D. Add a DataReader source to use a new Data Flow destination when the Failure constraint is fired.
E. Add a DataReader source to use a new Data Flow destination when the Completion constraint is fired.
F. Edit the Error Output properties for each DataReader source and configure each data source for error handling.
Answer: A,D,F
5. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package.
The package uses at least one sequence container in one transaction. Each transaction controls a Data Flow task and a Control Flow task. Each Data Flow task has a Success constraint.
The Control Flow task follows the Success constraint. The package must include the following requirements: Each Data Flow task must use its own transaction.
The Control Flow task and the Data Flow task that precedes it must succeed or fail as an atomic unit.
A restart point must restart each Data Flow task and the Control Flow task that follows it as an atomic unit.
You need to make changes in the control flow designer to meet the outlined requirements.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add all the Data Flow tasks and the Control Flow tasks to one sequence container.
B. Add a sequence container for each Control Flow task and the Data Flow task that precedes it.
C. Change the FailPackageonFailure property to true for each new sequence container that is added to the package.
D. Change the FailPackageonFailure property to false for each new sequence container that is added to the package.
Answer: B,C
6. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package. The OLE DB data source for the package is a database that is updated frequently.
You need to create a package that accomplishes the following tasks: Implement the IRowsetFastLoad interface.
Support various data flow destinations.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Use an OLE DB data flow destination.
B. Use a Recordset data flow destination.
C. Use a DataReader data flow destination.
D. Create separate data flow destinations within the same Data Flow task.
Answer: A,D
7. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package. The package is named UpdateTable.dtsx and contains a variable named runID. The package must run by using the dtexec utility. The runID variable must be set at runtime to a value of 5. You need to meet the outlined requirements. What should you do?
A. Execute dtexec /F "c:\ssisPackages\UpdateTable.dtsx" /SET \packages.variables[runID].Value;5.
B. Execute dtexec /F "c:\ssisPackages\UpdateTable.dtsx" /SET \packages.variables.runID=5.
C. Create a text file that specifies the variable name and value in the format package.variables[runID].Value = 5. Execute dtexec /F "c:\ssisPackages\UpdateTable.dtsx" /COM
D. Create a text file that specifies the variable name and value in the format runID=5. Execute dtexec /F "c:\ssisPackages\UpdateTable.dtsx" /COM
Answer: A
8. You create 25 Microsoft SQL Server 2005 Integration Services (SSIS) packages on the development server. You decide to deploy the SSIS packages on the test server. You need to create a repeatable process that will allow you to deploy the packages to the package store on the test server if the packages change. You also need to ensure that this is achieved with minimum effort. What should you do?
A. Use Microsoft SQL Server Business Intelligence Development Studio (BIDS) to save each package to the remote server.
B. Use the dtutil utility in a batch file to deploy each of the package .dtsx files to the remote server with the /Fi option.
C. Copy the Microsoft SQL Server Business Intelligence Development Studio (BIDS) files to the remote server and build the SSIS project on the remote server.
D. Create a package deployment utility in Microsoft SQL Server Business Intelligence Development Studio (BIDS) and use the Deployment Wizard to deploy all the packages.
Answer: D
9. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package. You need to ensure that the package came from a trusted source. What should you do?
A. Change the CheckSignatureOnLoad property of the package to false.
B. Change the CheckSignatureOnLoad property of the package to true.
C. Create a certificate. Change the CheckSignatureOnLoad property of the package to false.
D. Create a certificate. Change the CheckSignatureOnLoad property of the package to true.
Answer: D
10. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package. You create a table and populate the table with the required data. You receive an error message "destination table not found" when you run
the package without the package destination objects. You need to set a package property that runs the package without giving the "destination table not found" error message when the configuration setting of the Connection Manager fails. Which package property should you set?
A. DelayValidation = true
B. MaximumErrorCount = 2
C. DisableEventHandler = true
D. FailPackageOnFailure = false
Answer: A
11. You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package. The package is connected to a database on your development server by using a connection manager. You decide to use the DTExecUI utility to run the package. You need to change the connection of the connection manager to a different server at run time without using a package configuration file. What should you do?
A. Specify an appropriate command file by using the Command Files dialog box.
B. Specify an appropriate Connection String variable in the Set Values dialog box.
C. Specify an appropriate package configuration by using the Configurations dialog box.
D. Specify a different connection string for the connection manager by using the Connection Manager dialog box.
Answer: D
12. You are designing a Microsoft SQL Server 2005 Reporting Services (SSRS) accounting report. Every other line of output in the report table must have a green background. You need to use the appropriate expression for the BackgroundColor property of the table. Which expression should you use?
A. =Iif((RowNumber("Odd")),"Green","White")
B. =Iif((RowNumber(Nothing)),"Green","White")
C. =Iif((RowNumber(Nothing) MOD 2),"Green","White")
D. =Iif((RowNumber(InScope("Odd"))),"Green","White")
Answer: C
13. You are designing a Microsoft SQL Server 2005 Reporting Services (SSRS) report. The report must use a custom assembly to perform real-time lookup and currency conversion. The assembly has a static class named CurrencyConversion that exists in the namespace FinancialCalc. The class has a method named ToEUR that requires two arguments, Currency and CurrencyCode. You need to reference the ToEUR method in an expression to convert USD to EURO when the report runs. Which expression should you use?
A. =Code.FinancialCalc.CurrencyConversion.ToEUR (Fields!Currency.Value,"USD")
B. =Code!FinancialCalc.CurrencyConversion.ToEUR (Fields!Currency.Value,"USD")
C. =FinancialCalc.CurrencyConversion.ToEUR (Fields!Currency.Value,"USD")
D. =FinancialCalc!CurrencyConversion.ToEUR (Fields!Currency.Value,"USD")
Answer: C
14. You are designing a Microsoft SQL Server 2005 Reporting Services (SSRS) report model. Users must develop their own SSRS reports by using your report model in the Report Builder tool. The data source for the report model is a Microsoft SQL Server 2000 database that contains 900 tables and 700 views. You need to build a report model that allows users access to only the 10 tables that they require for reporting. What should you do?
A. Select the Create roles rule when you generate the report model.
B. Create a data source view and select the Restrict to Schema(s) option.
C. Create a data source view and select only the required tables and views.
D. Clear the Create entities for all tables rule when you generate the report model.
Answer: C
15. You are designing a Microsoft SQL Server 2005 Reporting Services (SSRS) report. You notice that while printing a report, blank pages are printed after every page that contains the data. But the report appears correctly when you view it on screen. You need to ensure that the blank pages are not printed. Which report property should you use?
A. Page Size
B. Grid Spacing
C. Interactive Size
D. DataTransform
Answer: A
More Free 070-445 exam questions
70-445 Exam Prep
Learn what you need to know to pass the 70-445 exam easily
Guarantee your
CertifySky offers free demo for 70-445 exam. You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products. If you want to try 70-445 Exam Prep Demo, Click the "Try Demo" button.
70-445 Certification Exam and Study Guide
There are many online resources for preparing for the
CertifySky is the online Certification Expert recognized by a worldwide audience of IT professionals and executives alike as the definitive source of training materials for the candidate seeking insight, updates and resources for vendor certifications.
70-445 Practice Test Questions, Printable PDF Braindumps
We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our 70-445 Preparation Exam Material provides you everything you will need to take a certification examination. Details are researched and produced by Certification Experts who are constantly using industry experience to produce precise, logical and verified explanations for the answers. You may get questions from different web sites or books, but logic is the key.
Our
Furthermore, we are constantly updating our 70-445 Exam. These 70-445 Exam updates are supplied free of charge to Certify Sky.com customers- hereby becoming an investment rather than a disposable product. Our clients receive the most reliable and up-to-date information when they decide to take the exam, just contact us. Our candidates walk into the Testing Room as confident as a Certification Administrator.
Like actual certification exams our 70-445 Exam is in multiple-choice questions (MCQs). After purchasing our products you are just a step away from testing for certification. Still not convinced? Try our free samples or choose to buy your 70-445 Practice Exam now!
Our 70-445 practice exams and study questions are composed by current and active Information Technology experts, who use their experience in preparing you for your future in IT.
Commitment to Your Success:
At Certifysky.com we are committed to you ongoing success. Our exams and questions are constantly being updated and compared to industry standards.
You are not about to purchase a disposable product. 70-445 practice exam updates are supplied free of charge. Regardless of how soon you decide to take the actual
The CertifySky 70-445 study guide is guaranteed to be 100% braindump free. We value the quality of training you receive through the 70-445 study guide and will never support 70-445 braindumps, or any 70-445 brain dump site. 70-445 braindump sites cannot compare to the understanding, learning and comprehension you will gain from a non-70-445 braindumps site, based on facts and case studies, like Certify Sky.
When selecting the CertifySky 70-445 exam study preparation materials, you are purchasing the highest quality CertifySky 70-445 products available through the web today. The 70-445 CertifySky practice exams and study guides are current and updated monthly, providing you with the highest 70-445 Certify Sky ROI. Start you road to 70-445 CertifySky success today, buy purchasing the CertifySky 70-445 training materials today!
